PLASTIC AIRPORT BARRICADE 24X96X14 [Price for 5]
24” x 96” x 14” Airport Barricade
The 24 x 96 is larger than other barricades making it great for areas that require more vertical height and substance. The units have a locking pin and hole setup so the barricades can make a continuous wall. Solar lights are preferred since there is no need to deal with a TSA escort to check on the lights.
24”x96”x14” Airport Barricade Specifications
- Height: 24 in / 60.9 cm
- Length: 96 in / 2.44 m
- Width: 14 in / 35.5 cm
- Empty: 35 lb / 12.7 kg
- Full: Approx 785 lb
- .15" thick heavy-duty polyethylene wall
The barricade is low enough to avoid interfering with aircraft, yet it creates a substantial boundary for construction demarcation. We also offer a 10 x 96 airport barricade.
AR24x96 Airport Barricade
Airport Runway: A Behind The Scenes Look
This airport barricade goes through extensive testing including a test of the durability of the 24 x 96 barricade. It’s filled with water then raised with a forklift and dropped on the pavement from 18 feet up. The barricade survives the impact without any leakage. Because this barricade is both tough and sturdy there are lots of applications it can be used for. Whether in a parking lot or to channel some type of traffic, they can be very useful.
24” x 96” x 14” Airport Barricade FAQ
What is reflective sheeting?
Reflective sheeting is an orange and white striped tape that goes on both sides of the barricade. The reflection makes it easier to be seen by vehicles and people.
Why do I have to get sheeting and why on both sides of the barricade?
Currently, the only way my supplier offers this barricade is with sheeting on both sides. It turns out that the way these are made it’s very economical to just add the sheeting on when they are manufactured.
How do the lights mount to the unit?
There are two holes where lights can fit in this unit, one is in the center where a light can be screwed in (for the Red 360 Degree light) the other is near the front of the unit where a typical road barricade light can be mounted using a bolt.
Does this meet FAA requirements?
The airport barricades and airport lights all meet FAA specifications per circular AC 150/5370-2F.
Can these connect to each other?
Yes, they come with all the necessary tools and hardware to connect unit to unit.
How much would it cost to ship?
We have past estimates on airport barrier shipping here. Add your barricades to the shopping cart and on the next page you can see an estimate. For more than 20 units please contact us for a custom freight quote, as the online calculator may actually show a higher rate. These come from Clearfield, UT (86014) as well as Chino, CA but we also have contacts on the East Coast so we will do our best to find a good rate.
Do you have any discounted used units?
We do occasionally have a stock of used units and will pass on a great discount to you. Call for more info!
Learn about airport barricade specifications on our blog.
Order 24” x 96” x 14” Airport Barricades Today
Transportation Supply has earned its reputation for the quality of the products we offer and our willingness to work with our customers. In addition to airport barricades, we also offer other road safety products, such as traffic barriers and traffic cones.
